Charabanc Diffuser Support: Maintenance, Cleaning, and FAQ

Operating Instructions:

Step 1: Mist & Intensity Control Rotate the rotary knob clockwise to activate the mist.  Continuing to rotate clockwise will increase the mist intensity; rotating  counter-clockwise will decrease the flow until the device clicks off.

Step 2:  Intelligent Diffusion Cycle The device operates on a precision cycle: 5 minutes of  active diffusion followed by a 3-minute pause. For safety and energy efficiency, the  system will automatically power down after 3 hours of continuous use. 

Step 3: Coverage & Performance After 15 to 20 minutes of operation, the fragrance will  gracefully diffuse to cover an area of approximately 20–30 square meters.

Step 4: Maintenance & Care To preserve the purity of your scents, please ensure the diffuser buld flask is thoroughly cleansed with medical-grade alcohol before switching to a  different essential oil.

Important Precautions

Oil Level Integrity When adding essential oils, ensure the liquid level does not exceed the "MAX"  indicator line as illustrated. Overfilling may cause the oil to backflow into the internal mechanism, leading to irreversible damage to the device. 

Oil Compatibility This device is a professional-grade pure oil nebulizer. To ensure the finest olfactory  experience and device longevity, please use only Charabanc bespoke fragrances or premium natural  botanical essential oils.


Tungsten Filament Edition

Ambient Illumination Control Adjust the luminous  intensity with a gentle, short press of the metallic  rotary dial to create your desired atmosphere. 

CAUTION:ELECTRICAL SAFETY To ensure  your safety and prevent the risk of electrical shock, do  not touch the internal copper terminals within the  lamp socket. 

Troubleshooting Guide 

Issue: No Mist Output

Diagnostic: Gently remove the glass flask and place your fingertip over the silicone aperture on the wooden  base to feel for air pressure.

Resolution: If air pressure is detected, the internal motor is functioning perfectly. The blockage is likely  within the flask; please follow the Protocol below to restore performance. 

Issue: Device Inactivity

Diagnostic: Please verify if the device has sustained internal damage due to essential oil backflow.

Note: Also, ensure the device is not simply in its 3-minute programmed rest interval. If it is in the  middle of a cycle, it will resume misting automatically.

Maintenance & Purification 

To ensure the longevity of your diffuser and the purity of each scent, we recommend the following rituals:

Method I: The Standard Rinse

Infuse: Pour a small amount of medical-grade  alcohol into the diffuser bulb.

Agitate: Secure the opening and gently  shake the flask in all directions to  dissolve residue.

Dry: Ensure the flask is completely dry  before its next use to maintain scent integrity.

Method II: The Deep Clear

Activate: Pour in medical-grade alcohol and  power on the device.

Pressurize: Use the specialized conduit to apply  gentle pressure to the connection point of the  internal atomizing core.

Clear: Continue until a steady stream of air or  mist is discharged, indicating the blockage has  been cleared.

Essential Safeguards

Pure Oil Exclusivity Use only 100% pure botanical essential oils. To maintain the integrity of the  nebulizing mechanism, do not use diluted oils or synthetic fragrances containing carrier oils.  Weekly Maintenance Protocol To prevent blockages within the integrated atomizing core, perform a  thorough cleanse at least once per week. Use exclusively medical-grade alcohol for all cleaning  procedures